Hose connector is also called quick connector, extension connector, quick union, adapter, internal pressure interface, etc. It is mainly used for the connection of hose, plastic tube, steel wire tube, etc. So what are the materials of the hose quick connector and how are they connected?
The joints can be divided into plastic joints, aluminum joints, cast joints, die-cast joints and oil tank joints according to the material. The size varies from 1.5 inches to 8 inches. The pressure of the plastic joint is low, which can be used for ordinary irrigation, and the pressure of the hose joint increases in turn. The connector is divided into upper and lower parts, which contain rubber pads. When connecting, hold the hose connector in one hand, insert the protruding part of the hose connector into the concave part at one end, and rotate the wrist clockwise to tighten the connector. Just fasten it at the groove, and connect the hose connector with clips at both ends.
Take the 3-inch aluminum alloy joint as an example, the caliber is 80mm, the working pressure is generally 6-16 kg, and it can be equipped with 8 high pressure 10 type hoses and 16 type hoses. The joints of watering hoses are generally matching clips, which are sold by hardware shops, and can be bought by hardware stores in the market, and can also be bought by general hose manufacturers. Yuze manufacturers are advised to buy fittings with matching pressure, which is not easy to leak and makes irrigation more labor-saving.